Hallo

Ich habe das MSI K8N Neo2 Platinum Mainboard und möchte mir gerne meine CPU Temps, System Temp, usw. anzeigen lassen.

Nun habe ich gelesen, dass ich dazu lmsensors benötige. (Auch bei Kernel 2.6.8-24.16 ?)

Also habe ich mir lmsensors runtergeladen.

Muss ich das erst installieren und dann sensors-detect durchführen oder vor der lmsensors Installation sensors-detect in der Konsole ausführen ?

Vielen Dank

Den Thread habe ich auch gelesen.

Es ist aber die Frage, ob ich bei meiner Kernel Version überhaupt lmsensors brauche.

Hier mal meine sensors-detect Ausgabe:

This program will help you determine which I2C/SMBus modules you need to
load to use lm_sensors most effectively. You need to have i2c and
lm_sensors installed before running this program.
Also, you need to be `root', or at least have access to the /dev/i2c-*
files, for most things.
If you have patched your kernel and have some drivers built in, you can
safely answer NO if asked to load some modules. In this case, things may
seem a bit confusing, but they will still work.

It is generally safe and recommended to accept the default answers to all
questions, unless you know what you're doing.

We can start with probing for (PCI) I2C or SMBus adapters.
You do not need any special privileges for this.
Do you want to probe now? (YES/no): YES
Probing for PCI bus adapters...
Sorry, no PCI bus adapters found.

We will now try to load each adapter module in turn.
If you have undetectable or unsupported adapters, you can have them
scanned by manually loading the modules before running this script.

To continue, we need module `i2c-dev' to be loaded.
If it is built-in into your kernel, you can safely skip this.
i2c-dev is not loaded. Do you want to load it now? (YES/no): YES
Module loaded succesfully.

We are now going to do the adapter probings. Some adapters may hang halfway
through; we can't really help that. Also, some chips will be double detected;
we choose the one with the highest confidence value in that case.
If you found that the adapter hung after probing a certain address, you can
specify that address to remain unprobed. That often
includes address 0x69 (clock chip).

Some chips are also accessible through the ISA bus. ISA probes are
typically a bit more dangerous, as we have to write to I/O ports to do
this. This is usually safe though.

Do you want to scan the ISA bus? (YES/no): YES
Probing for `National Semiconductor LM78'
Trying address 0x0290... Failed!
Probing for `National Semiconductor LM78-J'
Trying address 0x0290... Failed!
Probing for `National Semiconductor LM79'
Trying address 0x0290... Failed!
Probing for `Winbond W83781D'
Trying address 0x0290... Failed!
Probing for `Winbond W83782D'
Trying address 0x0290... Failed!
Probing for `Winbond W83627HF'
Trying address 0x0290... Failed!
Probing for `Winbond W83697HF'
Trying address 0x0290... Failed!
Probing for `Silicon Integrated Systems SIS5595'
Trying general detect... Failed!
Probing for `VIA Technologies VT82C686 Integrated Sensors'
Trying general detect... Failed!
Probing for `VIA Technologies VT8231 Integrated Sensors'
Trying general detect... Failed!
Probing for `ITE IT8705F / IT8712F / SiS 950'
Trying address 0x0290... Success!
(confidence 8, driver `it87')
Probing for `IPMI BMC KCS'
Trying address 0x0ca0... Failed!
Probing for `IPMI BMC SMIC'
Trying address 0x0ca8... Failed!

Some Super I/O chips may also contain sensors. Super I/O probes are
typically a bit more dangerous, as we have to write to I/O ports to do
this. This is usually safe though.

Do you want to scan for Super I/O sensors? (YES/no): YES
Probing for `ITE 8702F Super IO Sensors'
Failed! (skipping family)
Probing for `Nat. Semi. PC87351 Super IO Fan Sensors'
Failed! (skipping family)
Probing for `SMSC 47B27x Super IO Fan Sensors'
Failed! (skipping family)
Probing for `VT1211 Super IO Sensors'
Failed! (0x82)
Probing for `Winbond W83627HF Super IO Sensors'
Failed! (0x82)
Probing for `Winbond W83627THF Super IO Sensors'
Success... found at address 0x0290
Probing for `Winbond W83637HF Super IO Sensors'
Failed! (0x82)
Probing for `Winbond W83697HF Super IO Sensors'
Failed! (0x82)
Probing for `Winbond W83697SF/UF Super IO PWM'
Failed! (0x82)
Probing for `Winbond W83L517D Super IO'
Failed! (0x82)

Do you want to scan for secondary Super I/O sensors? (YES/no): YES
Probing for `ITE 8702F Super IO Sensors'
Failed! (skipping family)
Probing for `Nat. Semi. PC87351 Super IO Fan Sensors'
Failed! (skipping family)
Probing for `SMSC 47B27x Super IO Fan Sensors'
Failed! (skipping family)
Probing for `VT1211 Super IO Sensors'
Failed! (skipping family)

Now follows a summary of the probes I have just done.
Just press ENTER to continue:

Driver `it87' (may not be inserted):
Misdetects:
* ISA bus address 0x0290 (Busdriver `i2c-isa')
Chip `ITE IT8705F / IT8712F / SiS 950' (confidence:

Driver `w83627hf' (should be inserted):
Detects correctly:
* ISA bus address 0x0290 (Busdriver `i2c-isa')
Chip `Winbond W83627THF Super IO Sensors' (confidence: 9)


I will now generate the commands needed to load the I2C modules.
Sometimes, a chip is available both through the ISA bus and an I2C bus.
ISA bus access is faster, but you need to load an additional driver module
for it. If you have the choice, do you want to use the ISA bus or the
I2C/SMBus (ISA/smbus)? smbus

To make the sensors modules behave correctly, add these lines to
/etc/modprobe.conf:

#----cut here----
# I2C module options
alias char-major-89 i2c-dev
#----cut here----

To load everything that is needed, add this to some /etc/rc* file:

#----cut here----
# I2C adapter drivers
modprobe i2c-isa
# I2C chip drivers
modprobe w83627hf
# sleep 2 # optional
/usr/bin/sensors -s # recommended
#----cut here----

WARNING! If you have some things built into your kernel, the list above
will contain too many modules. Skip the appropriate ones! You really should
try these commands right now to make sure everything is working properly.
Monitoring programs won't work until it's done.

Do you want to generate /etc/sysconfig/lm_sensors? (YES/no): YES
Copy /usr/share/doc/packages/sensors/prog/init/lm_sensors.init.suse
to /etc/init.d/lm_sensors for initialization at boot time.


Kann da nicht wirklich viel mit Anfangen. Bin ein Linux Neuling

Ok


To make the sensors modules behave correctly, add these lines to
/etc/modprobe.conf:

#----cut here----
# I2C module options
alias char-major-89 i2c-dev
#----cut here----

Habe ich nun gemacht. Nun soll ich ja

To load everything that is needed, add this to some /etc/rc* file:

#----cut here----
# I2C adapter drivers
modprobe i2c-isa
# I2C chip drivers
modprobe w83627hf
# sleep 2 # optional
/usr/bin/sensors -s # recommended
#----cut here----


machen. Wie heisst die Datei, die ich editieren muss ?

Habe ich bisher alles richtig gemacht ?

*** Ich benutze SuSE 9.2

Also gut. Was ich nun bereits gemacht habe:

# I2C module options
alias char-major-89 i2c-dev

in /etc/modprobe.conf eingetragen.

-----------------------------------------

/usr/share/doc/packages/sensors/prog/init/lm_sensors.init.suse nach /etc/init.d/lm_sensors kopiert

-----------------------------------------

Was mir noch fehlt ist:

To load everything that is needed, add this to some /etc/rc* file:

#----cut here----
# I2C adapter drivers
modprobe i2c-isa
# I2C chip drivers
modprobe w83627hf
# sleep 2 # optional
/usr/bin/sensors -s # recommended
#----cut here----

also was wo muss ich das ergänzen ?

Alles klar. Habe es in die /etc/rc.d/boot.local geschrieben.

Hier meine Ausgabe


w83627thf-isa-0290
Adapter: ISA adapter
VCore: +1.09 V (min = +1.93 V, max = +1.93 V)
+12V: +12.28 V (min = +10.82 V, max = +13.19 V)
+3.3V: +3.17 V (min = +3.14 V, max = +3.47 V) ALARM
+5V: +4.96 V (min = +4.75 V, max = +5.25 V)
-12V: -14.91 V (min = -10.80 V, max = -13.18 V)
V5SB: +4.97 V (min = +4.76 V, max = +5.24 V)
VBat: +2.75 V (min = +2.40 V, max = +3.60 V)
fan1: 0 RPM (min = 18243 RPM, div = 2)
CPU Fan: 0 RPM (min = -1 RPM, div = 2)
fan3: 0 RPM (min = -1 RPM, div = 2)
M/B Temp: +23°C (high = +4°C, hyst = +0°C) sensor = thermistor
CPU Temp: +32.0°C (high = +80°C, hyst = +75°C) sensor = PII/Celeron diode
temp3: +34.0°C (high = +80°C, hyst = +75°C) sensor = thermistor
ERROR: Can't get VID data!

Letzte Frage

Was ist VID data ?

Super. Dann kann ich mir ja nun mal ein schickes Theme aussuchen